Manley Stingray Integrated Amplifer

Manley Stingray® 

• 4 x Stereo Line RCA Inputs
• TRIODE - UL Switching
• RECORDING OUT 
• SUBWOOFER OUT
• TAPE LOOP (Insert) with Bypass switch
• Passive Noble Volume and Balance Controls
• All-Vacuum Tube Lo-feedback Stereo Integrated Design
• Output Tubes: 8 x EL84 Ships with Russian NOS EL84M (aka 6Pi14Pi-EB)
   (We are out of Ei 6BQ5)
• Driver Tubes: 2 x 6414 Ships with GE or RAYTHEON JAN NOS USA or 6414W
• Input Tubes: 2 x 12AT7EH Ships with: 12AT7EH large plate Electro-Harmonix Russian

*** USING OTHER TUBES: Read FAQ #16 ! ***

• Maximum Output Power UL mode: 40 Watts x 2 channels 1.5% THD @ 1kHz
• Maximum Output Power TRIODE mode: 20 Watts x 2 channels 
• Frequency Response: 15 Hz - 40 kHz, -1dB
• Gain: 37 dB at max Volume
• Input Sensitivity: 185 mV in = 50 watts out into 5 ohms
• Input Sensitivity Triode: 66mV in = 1W into 8 ohms
• Input Sensitivity UL: 53mV in = 1W into 8 ohms
• S/N Ratio: typically 87 dB A-WGT, 20Hz-20KHz
• Input Impedance: 50 Kohm nominal
• Optimum Speaker Load: 5 ohms
• Actual Output Impedance at   20Hz: 2.8 ohms 
                                          at 100Hz: 2.6 ohms
                                          at  1KHz: 2 ohms
• Damping Factor: 5
• Power Consumption Idle: 200W
• Maximum Power Consumption at Full Power: 370W
• MAINS Fuses: 
  100~120VAC operation: MDL 3 AMP / 250 Volt SLO-BLO
  220~240VAC operation: MDL 1.5 AMP / 250 Volt SLO-BLO

• B+ FUSES (2): MDA 1/4 AMP, 250 Volt SLO-BLO, Ceramic. (Located internally)

• Power Supply: is factory set for 100V, 120V or 220-240VAC operation 
  for original destination country's mains voltage.
• Operating Mains Voltage: changeable with power transformer re-wiring on PCB and fuse value change.
• Mains Voltage Frequency: 50~ 60Hz
• Power Cord: Detachable IEC standard. 
  Appropriate power cord supplied for destination country
• Dimensions: W= 19", D=14", H= 5 1/2"
• Shipping Weight: 30 lbs.

Stingray Sushi! Extensive review caught in the March 2005 issue of the Japanese MJ Magazine!